PA 6 GF — Glass-Fibre Reinforced Polyamide 6
PA 6 GF is PA 6 with glass-fibre reinforcement, which significantly increases stiffness, strength, heat deflection temperature and dimensional stability.
What is PA 6 GF?
PA 6 GF is PA 6 with glass-fibre reinforcement, which significantly increases stiffness, strength, heat deflection temperature and dimensional stability.
Typical properties
| Density | ~1.25–1.45 g/cm³ |
| Tensile strength | ~100–200 MPa (depending on GF content) |
| Stiffness | much higher than unreinforced PA 6 |
| Heat deflection | significantly improved |
Typical applications
Structural partsEngine compartment componentsHousingsBracketsTechnical functional partsConnectors
Industries
AutomotiveElectrical engineeringMechanical engineeringHousehold appliancesConstruction
Processing
Mainly injection moulding. Account for tool wear caused by glass fibres; thorough drying is mandatory.
How NSB supplies PA 6 GF
NSB Polymers trades PA 6 GF in Prime, Near-Prime, Wide-Spec, Off-Grade and Stocklot qualities — sourced from 50+ producers and 200+ trading partners worldwide. Available lots change weekly.
Related materials
Typical guide values only. Actual density, tensile strength, MFI, heat deflection and processing behaviour vary by producer, additive package, reinforcement content, moisture, colour, recycled content and quality level (Prime, Near-Prime, Wide-Spec, Off-Grade, Stocklot). These values are not a specification and no guarantee of suitability for a specific application — binding are only written offers and agreed specifications. See our Note on product information.
Request PA 6 GF
Pre-filled with your material — please add quantity and shipping address.