PA 6.6 GF — Glass-Fibre Reinforced Polyamide 6.6
PA 6.6 GF is a glass-fibre reinforced high-performance polyamide for parts under high mechanical and thermal load.
What is PA 6.6 GF?
PA 6.6 GF is a glass-fibre reinforced high-performance polyamide for parts under high mechanical and thermal load.
Typical properties
| Density | ~1.25–1.50 g/cm³ |
| Tensile strength | ~120–220 MPa |
| Stiffness | very high |
| Heat deflection | high |
| Creep resistance | good |
Typical applications
Engine compartment partsElectrical housingsConnectorsStructural componentsTechnical brackets
Industries
AutomotiveElectrical engineeringMechanical engineeringHousehold appliancesIndustrial electronics
Processing
Primarily injection moulding. Drying, mould temperature and fibre orientation are decisive for part quality.
How NSB supplies PA 6.6 GF
NSB Polymers trades PA 6.6 GF in Prime, Near-Prime, Wide-Spec, Off-Grade and Stocklot qualities — sourced from 50+ producers and 200+ trading partners worldwide. Available lots change weekly.
Related materials
Typical guide values only. Actual density, tensile strength, MFI, heat deflection and processing behaviour vary by producer, additive package, reinforcement content, moisture, colour, recycled content and quality level (Prime, Near-Prime, Wide-Spec, Off-Grade, Stocklot). These values are not a specification and no guarantee of suitability for a specific application — binding are only written offers and agreed specifications. See our Note on product information.
Request PA 6.6 GF
Pre-filled with your material — please add quantity and shipping address.