Browse the full portfolio
PA, POM, PBT, PC, ABS, TPU — 31 materials, reinforced and unreinforced.
PA 6
Technical polyamide with good toughness, wear resistance, and wide use in injection moulding and extrusion.
PA 6 GF
Glass-fibre-reinforced PA 6 for higher stiffness, better dimensional stability, and increased mechanical strength.
PA 6.6
Premium polyamide with better heat deflection and strength than PA 6.
PA 6.6 GF
Glass-fibre-reinforced PA 6.6 for technical parts under high mechanical and thermal load.
PA 6/6.6
Copolyamide combining properties of PA 6 and PA 6.6, often offering better processability or flexibility.
PA 6/6.6 GF
Glass-fibre-reinforced copolyamide for stable technical applications with good strength and processability.
PA 6.10
Partly bio-based polyamide with lower moisture absorption and good chemical resistance.
PA 6.12
Polyamide with low moisture uptake, good dimensional stability, and high chemical resistance.
PA 12
Flexible, impact-resistant polyamide with very low moisture absorption — often used for tubes, lines, and technical parts.
PPA
High-temperature-resistant polyamide for demanding technical applications with high stiffness and chemical resistance.
PPA GF
Glass-fibre-reinforced PPA for high-temperature parts requiring high strength and dimensional accuracy.
POM Homo
Highly crystalline plastic with excellent stiffness, sliding properties, and wear resistance.
POM Copo
Acetal copolymer with good chemical resistance, dimensional stability, and very good processability.
POM GF
Glass-fibre-reinforced POM for parts requiring higher stiffness, strength, and reduced deformation.
PBT
Technical polyester with good dimensional stability, electrical properties, and chemical resistance.
PBT GF
Glass-fibre-reinforced PBT for technical and electrical parts with high stiffness and heat deflection.
PET GF
Glass-fibre-reinforced PET with high stiffness, good dimensional accuracy, and thermal performance.
PET G
Transparent, tough, and easy-to-process polyester — commonly used for sheets, displays, and packaging.
PCTA
Transparent copolyester with high clarity, good impact resistance, and good chemical resistance.
PMMA
Transparent acrylic plastic with excellent light transmission and high surface quality.
SMMA
Transparent styrene-methylmethacrylate plastic with good clarity, stiffness, and cost-efficient processability.
COC
Highly transparent specialty plastic with very low moisture absorption and excellent optical properties.
ABS
Impact-resistant standard plastic with good processability, surface quality, and broad use in technical housings.
SAN
Transparent, rigid plastic with good chemical resistance and higher clarity than ABS.
SBC
Styrene block copolymer with high transparency, flexibility, and good impact resistance.
PC
Highly impact-resistant, transparent engineering plastic with high heat deflection temperature.
TPU
Thermoplastic polyurethane with high elasticity, abrasion resistance, and good mechanical performance.
TPE-S
Styrene-based thermoplastic elastomer with rubber-like flexibility and easy processing.
TPV
Vulcanised thermoplastic elastomer with good elasticity, chemical resistance, and heat stability.
PA LGF
Long-glass-fibre-reinforced polyamide for extremely stiff and high-load structural components.